Voice Manipulation and Pronunciation Changes

Neep help editing a voice's lexicon? Want to share your custom lexicon?

Voice Manipulation and Pronunciation Changes

Postby MultiPort » Thu Dec 07, 2006 2:19 pm

.
Cepstral offers several ways to manipulate word and phrase pronunciation.

For instance:

1. First, the voice is sensitive to punctuation and word order. You might try rearranging your sentence, or verb selection, or adding commas or such to troubleshoot the issue.

2. Cepstral offers a lexicon.txt file where users can make global changes word pronunciation. Instructions are on our FAQ at:
http://cepstral.com/cgi-bin/support?page=userlex. For example, if you had a weather related application and wanted always to say "wind" in context and avoid ever confusing the wrist watch context of "wind". You would add the following to a new line in your lexicon.txt file:
    wind 0 w ih1 n d
3. SSML - We support the SSML control tags that might help you adjust pauses or add emphasis to clarify word or phrase meaning. Our FAQ also covers SSML briefly at: http://www.cepstral.com/cgi-bin/support?page=faq&type=ssml

4. You can also mix the two (Cepstral's lexicon + SSML) such that you send phonetic strings dynamically to the engine wrapped in the PHONEME tag. Examples:
    <phoneme ph="g ay1 k ow0">Geico</phoneme>
    <phoneme ph="l i1 d">lead</phoneme> ... as in The lead singer is Mick Jagger
    <phoneme ph="w ih1 n d">wind</phoneme> ...as in The wind outside today is 5 MPH
5. Similarly, if you favor other phone sets, you can use them too via the PHONEME tag. For example, SAMPA, a popular European phone set could be used as in the following example:
(http://www.phon.ucl.ac.uk/home/sampa/home.htm)
    <phoneme alphabet='sampa' ph='gaIko'>Geico</phoneme>
    *Note SAMPA phones does not have spaces, and Cepstral's do.

6. Lastly, Cepstral offers professional services. We can "tune" your prompts at a lower level than what SSML can. If needed, we can even have the original human speaker add your prompts to the TTS voice database. Check with sales for this option.

Thanks,

-Cepstral Sales
Last edited by MultiPort on Fri Feb 02, 2007 2:05 pm, edited 1 time in total.
MultiPort
 

TextAloud offers some pronunciation alteration as well.

Postby TaoPhoenix » Mon Jan 15, 2007 11:42 pm

This kind of option may tie into the lexicon behind the scenes; I'm not sure.

I found it vital to get "OK" to quit being "Oklahoma". There are a few other horrid ones as well that escape me at the moment. I think these originate with Microsoft's fundamental engines.
Refuse "1984" and "Fahrenheit 451".
TaoPhoenix
 
Posts: 9
Joined: Mon Jan 15, 2007 11:18 pm

Anyone willing to share a lexicon.txt file?

Postby Shaggyman » Sun Jan 28, 2007 12:10 pm

I have just started with a Cepstral voice I have licensed with the intention of producing audiobooks to contribute to the Internet Archive for free distribution. I want to correct the pronunciation of as many words as possible. Does anyone out there have a lexicon.txt file they are willing to share? I will eventually post mine, but I have just started it and it contains only a few words.


Thanks,
Leslie Evans
Shaggyman
 
Posts: 3
Joined: Thu Jan 25, 2007 1:40 pm

lexicon.txt error messages

Postby Shaggyman » Sun Jan 28, 2007 12:15 pm

I have just started to work with adding words to lexicon.txt, and as suggested have been using the run swift command to preview how words sound. it took a while to realize when I tried many variant vowels trying to get the right sound but nothing was changing that an error message was being flashed on the screen for a few seconds saying that it was ignoring my attempted phonemes as invalid. There was no apparent reason why any possible vowel sound couldn't be placed after a consonent, so I have no way of knowing why my various choices were ruled invalid. Are these rules written down anywhere?

Also, the ony way I could view this list of rejected words was to hit the Print Screen button as it flashed by and dump the screen into PhotoShop. Surely if there is going to be an error message it should stay on the screen long enough to read it.
Shaggyman
 
Posts: 3
Joined: Thu Jan 25, 2007 1:40 pm

Postby Alex » Fri May 18, 2007 10:22 am

Hi Shaggy,

The general format is:

word 0 w er1 d
wordtwo 0 w er1 d t uw1

Some things that can prevent a userlex entry from being valid are:
    * Capitalization of the entry: (Word 0 w er1 d) - or - (word 0 w eR1 D)
    * Leaving out the zero after the word: (word w er1 d)
    * Not having stress on a vowel phoneme: (word 0 w er d)

Hope this helps,

-Alex
Alex
 
Posts: 26
Joined: Mon Dec 04, 2006 11:19 am

Postby Tom55 » Thu Dec 20, 2007 12:09 pm

I'm trying out Cepstral voice for the first time and I really seem to like it!
Tom55
 
Posts: 3
Joined: Thu Dec 20, 2007 12:05 pm

Not working

Postby mthakershi » Thu Mar 11, 2010 12:55 pm

I am trying to instruct my system to say simple words in proper pronunciation.

2 examples
#fine
fine 0 f ah1 y n
#pressure
pressure 0 pr esh1 er0

Swift throws error and ignores entries.
What are the rules? Can someone point to a document. I did see basic cepstral support page that has some information but there is no way one can build words from that help.

Thank you.
mthakershi
 
Posts: 6
Joined: Thu Mar 11, 2010 12:52 pm

Hello

Postby mthakershi » Tue Apr 13, 2010 1:25 pm

Why is no one replying to my question? Please help.
mthakershi
 
Posts: 6
Joined: Thu Mar 11, 2010 12:52 pm

Postby AdamW » Sat Apr 24, 2010 6:08 pm

The simple reason that no-one is replying is because the answer to your question is posted as the first posting to this thread. Please read the first post of this sticky thread as it give the link to an online page describing the format, location and rules of the user lexicon.
AdamW
 


Return to Pronunciation

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron