how do I go about this?

How do you use speech and what if...

how do I go about this?

Postby zap » Fri May 21, 2010 7:13 am

Hi

I need to turn a group of words that specify a location in a building from text into speech
e.g. level 4 room 14.
I need to do this on a PC/laptop where the text to be spoken is produced by a program running on the PC, which in turn decides what text has to be spoken based on information that comes from a network connection. This is for internal use in our company and might be on 30 or 40 computers.

How would I go about this?
Should I use the "voice software" with a single voice or do I need to get the SDK. Which would be the most cost effective and which would have the best speech quality?

TIA
zap
 
Posts: 3
Joined: Fri May 21, 2010 6:53 am

Postby AdamW » Fri May 21, 2010 7:35 am

If all you need to speak four words every so often, here are the options:

- If your application is SAPI-enabled (that is, it can interface to Microsoft's Speech API, version 5.1 or later) then you can just select the voice and ask it to speak, Cepstral voices included.

- If your application is not SAPI-compliant, once you install one Cepstral voice, you get a command line executable called swift which you can use within a script to speak the words. The spoken words may be saved in a file and handed to the program, or provided on the command line as arguments.
You have control over timing and pronunciation using SSML (http://www.cepstral.com/cgi-bin/support ... &type=ssml) and the user lexicon mechanism (http://www.cepstral.com/cgi-bin/support?page=lexicon).

- If neither of these two simpler solutions will work, you can always buy the SDK and get all programmatic...

As always, download and test the voice you want before you buy.
AdamW
 

Postby zap » Sat May 22, 2010 8:10 pm

It could be from about 4 to 15 words at random intervals say, 30 seconds to 20 minutes.

The application hasn't been written yet. I'm completely new to TTS. Can you tell me if I understand this correctly?

If we use MSAPI, it comes with some free voices or we can buy a CEPSTRAL voice at $30 per voice. Are the CEPSTRAL voices better quality than the free voices? Clarity is the most important with the voice but it also needs to be as "pleasant" as possible.

If we use swift, can we call swift from our application, can we call it from a WIN32 application and then carry on doing other things while it speaks? If you have two CEPSTRAL voices, how do you choose which voice to use?

How much development time would we save using swift instead of MSAPI?

Thanks
zap
 
Posts: 3
Joined: Fri May 21, 2010 6:53 am

Postby zap » Sat May 22, 2010 8:19 pm

Also, the application will be used internally in our company but we don't want every user to have to purchase and register each voice on their computer. We just want a simple installation process for each computer. Is there a way to handle that?
zap
 
Posts: 3
Joined: Fri May 21, 2010 6:53 am

Postby Patrick » Mon May 24, 2010 11:10 am

zap,

Please give me a call to discuss licensing.

Patrick Dexter
412-432-0400
Patrick Dexter
Dir. Bus. Dev.
Cepstral LLC
User avatar
Patrick
 
Posts: 13
Joined: Fri Jul 11, 2008 1:13 pm
Location: Pittsburgh


Return to Voices in Action

Who is online

Users browsing this forum: No registered users and 0 guests

cron