Testing with Vicidial

Voices aren't working properly?

Testing with Vicidial

Postby ctc_olsen » Mon Apr 01, 2013 1:56 pm

Hi. I think we already have this set up but how to we test if text to speech is working already?

Code: Select all
 asterisk -rx "core show application swift"

  -= Info about application 'Swift' =-

[Synopsis]
Speak text through Swift text-to-speech engine.

[Description]
  Swift([<Voice>^]text) Speaks the given text through the Swift TTS engine.
Returns -1 on hangup or 0 otherwise. User can exit by pressing any key.


Code: Select all
swift -V

Cepstral Swift v6.0.1, March 2012

Default Voice:  Callie-8kHz          v6.0.0
Language:       US English           v5.1.0
Lexicon:        unknown              v0.0.0

Concurrency:    1 Port(s) Registered
                0 Port(s) In Use

Distribution:   No audio distribution license was found.
                Saving audio to a file is disabled.

Copyright (C) 2000-20012, Cepstral LLC.

ctc_olsen
 
Posts: 4
Joined: Mon Apr 01, 2013 1:51 pm

Re: Testing with Vicidial

Postby Weiyun » Mon Apr 01, 2013 2:39 pm

Hi,

To use Swift TTS engine in the Asterisk PBX, you need to setup a dialplan.
By default, the dialplan file is located at /etc/asterisk/extensions.conf

Here is a dialplan example:

[some_context]
exten =>2000,1,NoOp()
same =>n, Swift(This is a test of Cepstral's TTS in Asterisk)
same =>n, Hangup()


--Cepstral Support
User avatar
Weiyun
 
Posts: 5
Joined: Wed Mar 20, 2013 11:10 am

Re: Testing with Vicidial

Postby ctc_olsen » Tue Apr 02, 2013 1:41 pm

Sorry but I don't understand.

[some_context]
exten =>2000,1,NoOp()
same =>n, Swift(This is a test of Cepstral's TTS in Asterisk)
same =>n, Hangup()


Which part should I set this up? Can you please give a sample scenario?
ctc_olsen
 
Posts: 4
Joined: Mon Apr 01, 2013 1:51 pm

Re: Testing with Vicidial

Postby Weiyun » Wed Apr 03, 2013 8:57 am

Hi,

I assume you installed an Asterisk box and a Swift voice, but you don't know how to set it up.
If you've never worked with Asterisk PBX before, I suggest a book to you, "Asterisk The Definitive Guide".
Google it, and you can find the pdf to download. This book would be very helpful to you to set up the Asterisk box.

In default, you can find "sip.conf" and "extensions.conf" in the folder /etc/asterisk
In "sip.conf" is where you define users, and in "extersions.conf" is where you set up the dialplan.
So, when a user calls in, the call would be processed according to the dialplan.

For example,
In an office, there are two users, one's extension number is 1000, and the other is 2000.
Above all, you need to setup the two users on two SIP phones or two softphones (a computer program).
Then, you need to configure the network, firewall, etc.

Now, you can define these two users and their extension numbers in the "sip.conf",
and you assign each user the context "in_office".

[1000]
type=friend
host=dynamic
secret=1234
context=in_office

[2000]
type=friend
host=dynamic
secret=1234
context=in_office

Meanwhile, in the dialplan "extensions.conf", you need to have

[in_office]
exten =>2000,1,NoOp()
same =>n, Swift(This is a test of Cepstral's TTS in Asterisk)
same =>n, Dial(2000)
same =>n, Hangup()

So, when user 1000 calls number 2000, the Asterisk box would pickup the call, and first return the Swift voice, and then forward the call to user 2000's phone. If user 2000 picks up, they can talk; if not, after a while, the Asterisk box would hangup the call.

This is the simplist example. The Asterisk PBX can do much more than that. But it's beyond our scope to assist you.
However, you can always refer to that book I recommand.

Last but not the least, you should be clear what you want to achieve using the Asterisk box and Swift voice, and start from there.


--Cepstral Support
User avatar
Weiyun
 
Posts: 5
Joined: Wed Mar 20, 2013 11:10 am


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 5 guests

cron